Page 7 of Industrial News about Pipe Fitting Industry

Manufacturing of bends At present, there are two common manufacturing processes for bends in the world. One is hot push and the other is hot bending. If you want to make a bend with a small nominal diameter, the hot push process is generally used, while the hot bending process is...

The elbow is a common component in the piping system, and its main function is to change the direction of the pipe. Therefore, the elbow plays an important role in pipeline construction. There are many kinds of elbows, such as stainless steel elbows, alloy steel elbows and cast iron elbows. According...

There are many dos and don'ts for installing the elbow. Because the elbow is directly connected with the straight pipe, leakage will occur if you are not careful enough to install the pipe elbow. What should you pay attention to during the installation of the elbow? 1. Keep the...

1. The thin-walled stainless steel press fitting should be handled with care, and should not be thrown or trampled during construction. 2. Stainless steel press fittings should be placed away from direct sunlight.   3. When stainless steel press fittings have oil stains,...

As the name describes, stainless steel pipe fittings are made from stainless steel. They include stainless steel elbows, tees, crosses, reducers and pipe caps. According to the connection, they can be divided into four types: stainless steel socket fittings, stainless...

Reducing elbow materials are the core of new materials and play an important role in promoting and supporting the development of high tech. In the field of research of global new materials, wear-resistant materials account for about 85%. The material of the high-pressure elbow is special, and the...

Generally, large diameter elbows will be deformed after welding. If the deformation exceeds the permissible value, the use of the elbows will be affected. The main reason for the deformation of the elbows is local heating and cooling of weldments. During welding, only the partial area of...

Stainless steel pipe fittings include stainless steel elbows, stainless steel tees, stainless steel crosses, stainless steel reducers, stainless steel pipe caps, etc. According to the connection method, the fittings can be divided into four types: stainless steel socket weld fittings, stainless steel...

What should you do after the elbow corrodes? How can you detect that it is corroded? After the elbow is corroded, it usually shows that the pipe wall of the elbow becomes thinner, and local pitting appear. At present, the widely used elbow corrosion detection methods at home and...

Butt welded pipe fittings are made by welding steel plates together after mould pressing. These fittings mainly include butt weld elbows, butt weld tees, butt weld reducers, etc. The fittings are low in price, thin in thickness and simple in the manufacturing process so...