-
Stainless Groove Pipe-fitting Conjunction Four Advantages
Posted: 07/20/2015 05:34:14 Hits: 436This article introduces four advantages of stainless groove pipe-fittings conjunction in detail. 1.Simple operation The conjunction of the stainless steel groove pipe-fittings is very simple, which doesn't need professional ability, and even common workers can operate it through simple training.... -
High-pressure Elbow Connection and Application
Posted: 07/06/2015 05:17:44 Hits: 0The pipe fittings of high-pressure elbow include a curved pipe bending, whose characteristic is having a connection of a shunt straight channel. It has reasonable structure, equal piping stress evenly, simple pipeline system, convenient operation, cheap investment, which can reduce the pipeline resistance,... -
High-pressure Elbow Connection and Application
Posted: 07/06/2015 05:17:35 Hits: 326The pipe fittings of high-pressure elbow include a curved pipe bending, whose characteristic is having a connection of a shunt straight channel. It has reasonable structure, equal piping stress evenly, simple pipeline system, convenient operation, cheap investment, which can reduce the pipeline resistance,... -
The Manufacturing Technology of Reducer
Posted: 06/17/2015 11:37:37 Hits: 392The head of reducer can be made of steel as raw material, and some specifications head can also be produced through steel plate stamping forming process. The shape of trimming die used for stretching can be designed with reference to the size of the head and then use the trimming die to stretch and... -
An Introduction of Carbon Steel Elbow
Posted: 06/08/2015 04:38:01 Hits: 411Elbow is used for bend connection of pipes, which connect two of the same nominal diameter tube and make an angle turning. From materials, the elbow can be classified into carbon steel elbow, cast steel elbow, alloy steel elbow, stainless steel elbow, copper elbow, and aluminum alloy elbow, etc. Bend... -
Characteristic Analysis of Punched Elbow
Posted: 05/25/2015 11:45:24 Hits: 333Elbow is a common pipefitting for connection in the pipe installation, which is used for link the pipe bend. Its other names are 90 degree elbow, right-angle elbow, etc. Its application: connecting two tubes with the same nominal diameter to make a 90 degree bend for pipes. 1. According... -
9 Selecting Standards for Pipe Supports and Hangers
Posted: 05/12/2015 02:03:36 Hits: 584Selecting appropriate pipe support is very helpful for construction progress, and here are 9 standards which can make your design easier. 1. When choosing pipe support, you should select appropriate one according to the loading capacity and direction of support point, bearing point, displacement... -
Main Advantages of PE-RT Plastic Pipes
Posted: 04/10/2015 04:17:07 Hits: 1034PE-RT plastic pipes have unique advantages as described below: 1. Good stability and long-term pressure-resistant property. Good homogeneity, stable performance and good creep resistance capacity, ensuring up to 50 years of service life under hot water heating system. 2. Good impact resistance property... -
Adhesion Processes of Plastic Pipe Fittings
Posted: 04/02/2015 04:43:31 Hits: 12731. Before carrying out adhesion treatment of tube and pipe fittings, the inner surface of bell ends and the outer surface of sockets should be wiped clean by dry cloth. But these surfaces should be wiped clean by acetone, if covered with oil stain. 2. Cross sections of pipe fittings should be flat and... -
Manufacturing Techniques of Seamless Reducing Pipes
Posted: 03/28/2015 10:10:53 Hits: 511Stainless steel reducing pipeline is a kind of pipe fittings that applied to tapered pipes. In general situation, the forming technologies are reducing suppression, expansion suppression or reducing and expansion suppression. For some reducing pipes with special specifications, stamping forming is also...