Page 8 of Technical Articles for Pipe Fitting

GB elbow has certain anti-corrosion (oxidizing acid, organic acids, cavitations), heat-resisting and wear-resisting performance. It is usually used in power plant, chemical, oil and other equipment materials. GB elbow has poor weld ability, which should be paid attention to welding and heat...

This technical article indicates eight tips of stainless steel pipefitting transportation and process. 1. The convey of stainless steel pipefitting materials cannot be connected with other metal, which should be added some non-metallic materials such as plank or rubber sheet.   2. The arc starting...

Butt welding elbow material is a core in the field of new materials, which plays an important role in promoting and supporting the development of high and new technology. In the global research of new materials, wear-resistant materials account for about 85%. Butt welding elbow in use process often...

Stamping elbow, whose full name is stamping welding elbow, is produced through using pressing tool to make the board having the same material with the pipe become a half block of annular elbow and then weld the two half elbow together. Due to the difference of various pipe welding standards, and site...

Stainless pipe cap,is also known as pipe plug or pipe cover. The major function of pipe cap is welded in pipe end to cover the pipe with the same function as pipe plug. A pipe cap consists of these parts: convex cap, cone shell adjustable segment, flat lid and tighten port.   The major types of...

The major difference between stainless steel elbow and carbon steel elbow lies in their material. The stainless one has the chemical composition to keep elbow away from being rusted and corroded.   There is something should be taken into consideration when using and maintaining stainless steel...

This article introduces four advantages of stainless groove pipe-fittings conjunction in detail. 1.Simple operation The conjunction of the stainless steel groove pipe-fittings is very simple, which doesn't need professional ability, and even common workers can operate it through simple training....

The pipe fittings of high-pressure elbow include a curved pipe bending, whose characteristic is having a connection of a shunt straight channel. It has reasonable structure, equal piping stress evenly, simple pipeline system, convenient operation, cheap investment, which can reduce the pipeline resistance,...

The pipe fittings of high-pressure elbow include a curved pipe bending, whose characteristic is having a connection of a shunt straight channel. It has reasonable structure, equal piping stress evenly, simple pipeline system, convenient operation, cheap investment, which can reduce the pipeline resistance,...

The head of reducer can be made of steel as raw material, and some specifications head can also be produced through steel plate stamping forming process. The shape of trimming die used for stretching can be designed with reference to the size of the head and then use the trimming die to stretch and...

Elbow is used for bend connection of pipes, which connect two of the same nominal diameter tube and make an angle turning. From materials, the elbow can be classified into carbon steel elbow, cast steel elbow, alloy steel elbow, stainless steel elbow, copper elbow, and aluminum alloy elbow, etc. Bend...

Elbow is a common pipefitting for connection in the pipe installation, which is used for link the pipe bend. Its other names are 90 degree elbow, right-angle elbow, etc.   Its application: connecting two tubes with the same nominal diameter to make a 90 degree bend for pipes.    1. According...